| A9-24P2 Rotek Slewing Ring Bearings | Weight / Kilogram:0.624; Bearing number:4T-387/382; Nlim (oil):5,000 rpm; Minimum Buy Quantity:N/A; Dynamic load, C:79.3 kN; Fatigue limit load, Cu:11.8 kN; Manufacturer Name:NTN; Mass:0.63 kg; Characteristic cage frequency, FTF:0.44 Hz; T:21,946 mm; Bore Diameter (mm):57,15; r1s min:0.8 mm; Min operating temperature, Tmin:-40 °C; d:57,15 mm; Max operating temperature, Tmax:120 °C; D:98,425 mm; a:10.43 mm; |
| R8-35E3 Rotek Slewing Ring Bearings | (Grease) Lubrication Speed:3400 r/min; Basic dynamic load rating (C):133 kN; Bore Diameter (mm):105; Bearing number:6221-Z; Size (mm):105x190x36; B:36 mm; Basic static load rating (C0):105 kN; D:190 mm; Width (mm):36; Weight:3,79 Kg; C:36 mm; Outer Diameter (mm):190; d:105 mm; r min.:2,1 mm; |
| RKS.23 0941 SKF Slewing Ring Bearings | D:47 mm; D1 (max):44.6 mm; Fillet Radius/Chamfer:0.6 mm; b (min):1.4 mm; Dx (min):53.5 mm; Weight:0.078 kg; Dynamic Load Rating:10,100 N; Limiting Speed - Oil:18,000 rpm; ra (max):0.6 mm; Cy (max):2.9 mm; Factor fo:14.5; r1:0.5 mm; Static Load Rating:5,850 N; Bore Type:Cylindrical Bore; Snap Ring Outside Diameter:52.7 mm; da (min):29 mm; Enclosure:Single Shield with S; Da (max):43 mm; Radial Clearance:0.013 to 0.028 mm; |
| RKS.160.14.0544 SKF Slewing Ring Bearings | Width (mm):20,07; Size (mm):44.45x71.438x20.07; d:44,45 mm; Outer Diameter (mm):71,438; C:20,07 mm; Bearing number:17SBT28; Bore Diameter (mm):44,45; D:71,438 mm; d1:27,18 mm; B1:24,89 mm; |
| XSI140944-N INA Slewing Ring Bearings | Housing Bore Dia. (Dh) - 230 +0.046 / -0:230 +0.046 / 0; ID Chamfer Angle (B deg.):45; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; OD Chamfer Length (Co):1.800; Bearing number:AST090 22560; ID Chamfer Length (Ci):0.600; Shaft Dia., Nominal (d):225.0000; Bore Diameter (mm):225; Shaft Size (ds) - 225 -0.170 / -0.216:225 0.170 / 0.216; Bearing Length, Nominal (B):60.000; Outer Diameter (mm):230; |
| M4-34P4 Rotek Slewing Ring Bearings | Full Timken Part Number:QAAFL15A215SB; Engineering Group:Mounted Bearing; Oil Lubrication - B/C/O Seal:1300 rpm; Dimension N:2.930 in; Shaft Tolerance:0.0020 in; Grease Lubrication - T Seal:2400 rpm; Eng Internal Radial Clearance - Min:0.0020; C0 - Static Load:54100 lb; Float:0.083 in; Pre Install Clearance Min:0.0020 in; Eng Internal Radial Clearance - Max:0.0031; Oil Lubrication - T Seal:2900 rpm; |
| A10-35P1A Rotek Slewing Ring Bearings | Bearing number:60/22LU; Size (mm):22x44x12; Bore Diameter (mm):22,000; B:12,000 mm; C:12,000 mm; Outer Diameter (mm):44,000; d:22,000 mm; D:44,000 mm; Width (mm):12,000; |
| VSA200844-N INA Slewing Ring Bearings | Precision:A1; Bearing Type:Shielded; Max. Shaft Shoulder Dia. Inner (Ui):40.7; Ball Qty:9; Bore Dia (d):30.0000; Weight (g):199.00; Bore Diameter (mm):30; Outer Dia (D):62.0000; Radius (min) (rs):1.000; Static Load Rating (Cor):11,300; Min. Housing Shoulder Dia., Outer (Uo):55.100; Ball Dia (Dw):9.5250; Width (B):16.0000; Size (mm):30x62x16; Material:52100 Chrome steel (; Width (mm):16; Standard Clearance:C0; |